PLC Data Acquisition and Host System Display Solution for Auto Parts Production

Smart Manufacturing Device Networking & Data Acquisition

In automotive precision tube manufacturing, process parameters at core steps such as copper plating and machining leak testing directly determine product quality and yield rate.

Get a Quote

Need a solution tailored to your site? Our engineers offer a free assessment and selection advice.

Struggling to Control Auto Parts Production Data? PLC Acquisition + Host Display Provide the Answer

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

In automotive precision tube manufacturing, process parameters at core steps such as copper plating and machining leak testing directly determine product quality and yield rate. Manual record-keeping is slow, error-prone and out of date, and the number of good parts cannot be tallied automatically. These gaps hold back production upgrades. How do you acquire PLC and equipment data efficiently and make the production process visible and controllable? How do you connect equipment and migrate data to the cloud quickly without disrupting ongoing production? The PLC data acquisition and host system display solution that Daq IoT built for Qingdao Seah Precision Tube provides a replicable, practical answer.

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

Qingdao Seah Precision Tube Co., Ltd. is a wholly owned enterprise funded by investors from Hong Kong, Macao and Taiwan under South Korea’s SEAH Group. Founded in 2007 in Huangdao District, Qingdao, it specializes in automotive precision tubes. Its core products are automotive brake tubes and high-pressure fuel steel tubes, and it has long supplied key components to several well-known automakers as a critical supplier in the automotive supply chain. In the copper tube workshop, copper plating temperature, machining leak-test pressure and pressure drop are the key variables that determine the pass rate. If a parameter drifts out of control, the result is a batch of defective parts, wasting material, labor hours and cost.

Under the traditional production model, the company relied on manual logs for key process parameters. Recording was slow, data was error-prone and never real-time, and good-part counts could not be captured or tallied automatically. To solve these management problems, the company launched an industrial data acquisition and visualization project. The goal was full-process monitoring of core steps through digital means, steadier production and a higher yield rate.

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

The project set out clear requirements: acquire all data from 2 PLCs and 1 heating furnace temperature in the copper tube workshop. The Mitsubishi PLC (Q06H) handles temperature monitoring for the copper plating process of lead-acid battery iron tubes; the Omron PLC (NX1P2-PORT1) handles data acquisition from the leak-testing machines in the machining workshop. All collected data must be displayed in real time on the host system large screen, and the number of good parts must be captured, logged and tallied automatically.

Implementation raised two major difficulties that demanded a great deal from both the technical approach and the delivery team. First, PLC data acquisition had to judge equipment status from several data items and show the result as soon as the criteria were met. But production status bits are held only briefly, so the system had to complete acquisition, status logic evaluation and result display within 5 seconds — an almost unforgiving requirement for response speed and stability. Second, the site uses CHINO DB600 series digital temperature instruments from Japan. The manufacturer supplied no matching point list, so direct integration was impossible. The team could only test and iterate repeatedly against point lists of comparable domestic instruments to find the correct monitoring points and achieve stable readings.

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

To meet these demanding site conditions, Daq IoT developed a professional, efficient, low-intrusion implementation plan. Hardware is built on the company’s own communication management unit (IOT gateway) and the WiFi/Ethernet smart acquisition terminal (DAQ-GP-LAN). The host system runs the general-purpose industrial data acquisition system (DAQ FOR IIOT). Together they form a closed loop covering acquisition, parsing, status evaluation and display.

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

During on-site installation, the team made full use of the existing network. The data lines of the Mitsubishi and Omron PLCs were already aggregated at the workshop switch, so after quick configuration the acquisition gateway could reach the PLCs directly through that switch. No original PLC communication port was occupied, and neither equipment operation nor the existing control system was affected: no production stoppage, no retrofitting, fast integration. For the temperature instruments, standard RS-485 wiring was used. Drawing on the team’s extensive experience integrating overseas instruments and on reference point lists for comparable models, repeated commissioning and validation finally delivered accurate real-time temperature data.

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

Commissioning followed a strict on-site data comparison principle. With the general-purpose industrial data acquisition system on the host system at the core, the team completed status-bit logic evaluation and visual display through SCADA page configuration. Every displayed value was compared in real time with the process data on the on-site touch screen, ensuring that acquisition accuracy, response speed and display quality fully met production requirements.

PLC Data Acquisition and Host System Display Solution for Auto Parts Production

The delivered system exceeded the customer’s expectations. It groups data by PLC process channel and by key parameters such as temperature, and clearly presents copper plating temperature, leak-tester pressure and pressure drop, and the count of good parts. Production status is visible at a glance and abnormalities show up in real time. The host system software also reserves standard external APIs for quick integration with third-party systems such as MES and ERP. Historical data can be stored in mainstream databases including SQL Server and MySQL, supporting long-term traceability, quality analysis and production optimization.

From manual logs to digital automatic acquisition, and from scattered data to centralized visual display, Daq IoT has solved the core pain points of auto parts manufacturers: slow acquisition, large errors, difficult tallies and poor traceability. Its proven architecture, fast delivery and deep industry experience made this possible. This PLC data acquisition and host display case provides a standard, repeatable template for the automotive precision tube industry. It also transfers readily to machining, electronics manufacturing, hardware and plastics, and equipment manufacturing. It helps manufacturers move toward digital production, visual management and data-driven decisions at low cost, with fast deployment and stable operation, and progress toward higher-quality development.

Shanghai Daq IoT Technology Co., Ltd. specializes in the development and delivery of industrial data acquisition, IoT gateways and host system visualization systems. It has extensive project experience in PLC integration, instrument acquisition and workshop digitalization, and provides manufacturers with secure, stable and efficient digital transformation solutions that help Chinese manufacturing improve quality and efficiency.