Passive Wireless Current Sensor (Three-Circuit)

Passive Wireless Current Sensor (Three-Circuit)
Instrumentation

SC-LP-3CTLoRa is a passive wireless current sensor integrating high-precision current measurement and temperature monitoring. It transmits data to a receiving device via wireless communication, enabling real-time remote monitoring…

Get a Quote

Product Details

1 Product Overview

SC-LP-3CTLoRa is a passive wireless current sensor integrating high-precision current measurement and temperature monitoring. It transmits data to a receiving device via wireless communication, enabling real-time remote monitoring of the measured circuit’s data and early detection of potential safety hazards to ensure electrical safety.

The sensor adopts a dual power supply mode: it can operate by connecting to a CT current signal or via an internal battery, switching adaptively and flexibly. No external power supply is required, reducing maintenance. Its compact shape makes installation convenient and adaptable to various application scenarios.

3 Technical Parameters

Function Technical parameter
Current measurement Measuring circuits: three; measurement range: secondary input signal 100mA (1.2× overload continuous); measurement accuracy: ≤1% FS; current ratio: settable 1~9999 (set at factory per note)
Temperature measurement One built-in ambient temperature channel; measurement range: -20~85℃; measurement accuracy: ±2℃; resolution: 0.1℃
Wireless transmission Antenna: external (default angled rod antenna, optional suction-cup antenna); frequency band: 433MHz; transmission distance: 150m (open area); sending period: CT current 20s, battery 5min
Power supply CT current, built-in lithium battery (life 3~5 years)
Operating environment Temperature: -20~85℃; humidity: 5%~95% RH non-condensing
Protection rating IP42
Insulation Insulation resistance: terminal to housing >500MΩ
Installation Strong magnetic attachment, screw fixing

4 Wiring Terminals

Note: the terminals marked ”*” are the CT secondary current inputs, with input 100mA.

5 Structure & Outline Dimensions

5.1 Current Sensor

Item Detail
Sensor structure See diagram
Installation Bottom strong magnetic attachment or screw fixing

Item Detail
Sensor main unit outline dimensions, tolerance ±0.5mm See diagram

5.2 Current Transformer (optional)

Performance parameter CTK-16 CTK-22 CTK-36
Style Open/close type Open/close type Open/close type
Rated input current 100A / 100mA 200A / 100mA 600A / 100mA
Accuracy 0.5% 0.5% 0.5%
In-hole accuracy variation ≤0.2% (accuracy difference of a 10mm-diameter input current wire at different positions in the through-hole) ≤0.2% ≤0.2%
Aperture Φ16±1mm, suitable for cables 5mm-14mm in diameter Φ22±1mm, suitable for cables 5mm-20mm in diameter Φ36±1mm, suitable for cables 15mm-35mm in diameter
Transformer cable length 0.5m 0.5m 0.5m

6 Wireless Receiving Devices

It is compatible with multiple series of wireless receiving devices supporting various communication protocols, adapting to various on-site application needs and flexibly integrating into various systems to acquire data.

Item Model 1 Model 2 Model 3 Model 4
Outline dimensions 885937mm 906525mm 15013060mm 18812238mm
Display None None 4.3-inch color screen 7-inch touch screen
Number of sensors connected 64 64 128 128
Power supply AC/DC220V; DC9-36V DC9-36V AC/DC220V DC9-36V
RS485 interface 1 channel 2 channels 2 channels 2 channels
RJ45 / Yes Yes Yes
4G / Yes Yes Yes
Communication protocol Modbus-RTU Modbus-RTU Modbus-RTU Modbus-RTU

Note: for detailed information on the wireless receiving devices, refer to the manual of the corresponding model.

7 Common Troubleshooting

Fault symptom Analysis Solution
Indicator light does not flash Insufficient battery power Check whether the built-in battery has power; if not, replace it. When powered by battery only, it takes about 5 minutes for the indicator to flash.
Inaccurate current measurement Signal input terminal not tightened Re-tighten the wiring terminal
Transformer failure Check whether the input signal is consistent with the actual value and whether the transformer cable is open-circuited or damaged; replace the transformer if necessary
Sensor failure Replace the sensor
No data from the receiving device Incorrect setting Check whether the sensor ID and other information set on the receiving device are correct
Antenna not properly installed Check whether the antenna is correctly installed and intact
Distance too far Verify whether the distance between the sensor and the receiving device is within the nominal range