Spinning Mill Textile Equipment Data Acquisition Case

Spinning Mill Textile Equipment Data Acquisition Case
Smart Manufacturing

Spinning Mill Textile Equipment Data Acquisition Case

Get a Quote

Spinning Mill Textile Equipment Data Acquisition Case

1. Project Background

In recent years, with continuous national policy support and funding for intelligent manufacturing, digital workshop construction in Xinjiang has flourished. Cotton spinning enterprises are eager to use technology to improve production efficiency, stabilize product quality and optimize user experience, ultimately transforming from “traditional manufacturing” to “intelligent manufacturing” and holding their ground in fierce competition.

However, ideals are rich while reality is lean — many textile mills enthusiastically bought MES and installed large screens, only to find that workshop equipment still “fights its own battle” and data simply cannot come out.

With policy and funding support, Xinjiang digital workshops aim to improve production efficiency, product quality and user experience, ultimately achieving intelligent transformation and high-quality development of manufacturing and enhancing enterprise competitiveness.

2. Project Requirements and On-Site Survey

Requirements:

  • Full-parameter acquisition: acquire equipment process parameters, operating status and output information — all of it.
  • Real-time analysis: data must not sleep inside the equipment; acquire and analyze it in real time.
  • Deep MES integration: integrate seamlessly with the enterprise’s existing MES system to jointly build an intelligent, digital workshop.
  • Cost reduction and efficiency: improve production efficiency, reduce operating costs and achieve an efficient, intelligent and customized production mode.

Current plant situation:

  • Isolated equipment with no information exchange, relying on manual equipment management — serious waste of human resources and low efficiency. Equipment brands are mixed with a wide age span and diverse communication protocols, forming “data chimneys”.
Process Equipment type
Opening and cleaning Bale plucker
Blowing Foreign-fiber remover
Carding Carding machine
Drawing Breaker drawing frame
Roving Roving frame
Spinning Spinning frame (1568 spindle / 129 spindle / 503 spindle mixed multi-model lines)

1 Bale plucker

2 Foreign-fiber remover

3 Carding machine

4 Breaker drawing frame

5 Roving frame

6 Spinning frame 1568

7 Spinning frame 129

8 Spinning frame 503

Equipment list:

No. Equipment System Brand Model Available interface Authorization required
1 Bale plucker trolley PLC Mitsubishi FX3U Serial occupied No
2 Blowing PLC Mitsubishi FX3U Serial occupied No
3 Foreign-fiber remover PC / / RJ45 No
4 Carding machine PLC Mitsubishi FX3U Serial occupied No
5 Breaker drawing frame PLC Delta DVP60 Serial occupied No
6 Roving Board card / / Serial occupied No
7 Spinning frame 1568 PLC Delta (black) DVP24 Serial No
8 Spinning frame 1568 PLC Delta (white) DVP24 Serial occupied No
9 Spinning frame 129 PLC Hexin CTSC Serial occupied No
10 Spinning frame 503 Legacy equipment / / None No

3. Data Acquisition Architecture

Through Shanghai Daq-IoT’s smart gateways and serial servers, data from the four device types — PLC, PC, board card and legacy equipment — is acquired to an edge server and then forwarded over MQTT to a cloud platform. The MES system reads the data from the cloud platform, analyzes and processes it and displays it on a large screen.

4. On-Site Implementation

PLC: 1) The Mitsubishi and Delta (white) PLCs have built-in serial ports, but the port is occupied by the HMI; the Daq-IoT smart gateway connects via a special serial monitoring cable (without affecting the original communication) and then joins the workshop network over Wi-Fi for data acquisition. 2) The Delta (black) PLC has a free serial port, so the smart gateway connects via serial and then over Wi-Fi. 3) The Hexin PLC has a built-in serial port occupied by the HMI; the serial server connects via a special serial monitoring cable and then over Wi-Fi.

PC: for the foreign-fiber remover PC, a wireless bridge connects through the network port and then joins the workshop network over Wi-Fi.

Board card: the roving equipment board has a built-in serial port occupied by the HMI; the serial server connects via a special serial monitoring cable and then over Wi-Fi.

Legacy equipment: for the legacy spinning frame 503, the serial server acquires equipment status and operating parameters through a speed sensor and then joins the workshop production network over Wi-Fi.

1 Mitsubishi PLC serial monitoring

2 Delta PLC serial acquisition

3 Delta PLC serial monitoring

4 Hexin PLC serial monitoring

5 Roving board serial monitoring

6 Legacy spinning frame

5. Data Acquisition, Storage and Display

  • Gateway acquires Mitsubishi PLC data

  • Gateway acquires Delta PLC data

  • Acquisition of foreign-fiber remover PC data

  • Acquisition of roving board data

  • Acquisition of Hexin PLC data

  • Acquisition of legacy spinning frame data

  • Data forwarded to MQTT cloud platform

  • Data display

6. Equipment Connection Status

No. Equipment System Brand Model Interface Acquisition Connected
1 Bale plucker trolley PLC Mitsubishi FX3U Serial occupied Wireless Yes
2 Blowing PLC Mitsubishi FX3U Serial occupied Wireless Yes
3 Foreign-fiber remover PC / / RJ45 Wireless Yes
4 Carding machine PLC Mitsubishi FX3U Serial occupied Wireless Yes
5 Breaker drawing frame PLC Delta DVP60 Serial occupied Wireless Yes
6 Roving Board card / / Serial occupied Wireless Yes
7 Spinning frame 1568 PLC Delta (black) DVP24 Serial Wireless Yes
8 Spinning frame 1568 PLC Delta (white) DVP24 Serial occupied Wireless Yes
9 Spinning frame 129 PLC Hexin CTSC Serial occupied Wireless Yes
10 Spinning frame 503 Legacy equipment / / None Wireless Yes

7. Project Results

One-sentence summary of the project’s value: this combination of IoT and MES not only helped the customer improve production efficiency and product quality but genuinely reduced production cost and resource consumption — digital transformation is not about spending money on concepts but about real, tangible efficiency gains.